18/11/2026 – Karl Mayer — auf Deutsch lesen
ITMA ASIA 2026
Karl Mayer shows machines for warp, knit and composite Weavers, warp knitters and composite producers need machines with high output. Karl Mayer is showing three machines designed for exactly these tasks at ITMA ASIA 2026 and in its product show in Changzhou.
Karl Mayer is showing three machines at ITMA ASIA 2026 for three stages of the textile chain. Warp preparation is at Booth 3/A24 in the Weaving Hall. The other two machines are at the company’s product show in Changzhou.
Warp preparation
The WARPDIRECT 2.0 has been in operation worldwide since its launch at the end of last year, notably in India, China and Europe. Its strengths include identical warping lengths for all warp beams. According to the company, speeds of up to 1,200 m/min are reached in practice.
The HSB Size Box of the PROSIZE sizing machine reaches a cover factor of up to 100% with reduced size add-on consumption. Savings of up to 10% can cut costs and environmental impact in sizing and later desizing, the company says.
“Our machines produce warp beams of the highest quality with high process efficiency. This offers particular advantages to textile manufacturers who are focused on generating real added value in a highly competitive market,” says Enzo Paoli, President of the Warp Preparation Business Unit at Karl Mayer.
Double needle bar raschel machines for spacer fabrics
Karl Mayer is presenting two new Jacquard double needle bar raschel machines, the RDJ 7/3 and the RDJ 6/2, designed for the footwear industry. Sports and athleisure apparel are also a focus. According to the company, they are up to 70% more productive than comparable machines on the market.
The seven-bar RDJ 7/3 allows functional zones and integrated patterns to be designed for more support or breathability. The RDJ 6/2, in gauge E 32, offers an exceptionally fine fabric appearance. According to the company, its E-32 warp knits are a cost-effective alternative to circular knits for garments.
Wireless piezo control replaces cable systems with conductive tracks in the bars. Retrofitting once meant handling up to 240 cable strands with 17 ribbon cables each. The piezo elements are simply plugged in. According to the company, its solution rules out electrical hazards for operators, and Karl Mayer plans to use the technology in its RASCHELTRONIC models soon.
Biaxial warp knitting for wind turbine blades
The MULTIPLY BX is a composite machine for biaxial non-crimp fabrics for rotor blades. It processes glass fibres with non-course-oriented weft insertion into reinforcement textiles with a high proportion of filler yarns and light weft yarns. Filler yarns of up to 2,400 tex and weft yarns of 100 to 200 tex are used, typically in a 6:1 weight ratio in the finished fabric.
At 1,600 to 2,200 min?¹, depending on stitch length, the machine delivers up to 500 m/h. According to the company, that is 20 to 25% more productive than the MAX GLASS ECO. Full performance is reached at stitch lengths of 4 to 5 mm.
The MULTIPLY BX takes over the operating concept, selected components and the basic structure of the laying system from the MAX GLASS ECO. The weft carriage is wider: from 8 inches on the MAX GLASS ECO to 12 inches for parallel weft insertion and 16 inches for cross weft insertion. The working width rises from 101 to 103 inches. According to the manufacturer, the machine runs more quietly with less wear. The MULTIPLY BX will be demonstrated live at the product show in Changzhou on 19 to 21 November 2026 and on 23 November 2026.




